MF14 gas mask
1. Product Information
The type MF14gas mask is a novel design gas mask, whose canister is connected directly to the face piece. When the air is a contaminated NBC agent, the gas mask provides effective protection to the wearers respiratory organs, eyes and facial skin. The gas mask is designed for the military, police and civil defense and can also be used in industry, agriculture, storehouses, scientific research work, etc.
2.Composition and characters
MF14 gas mask is a kind of fillet type , the faceblank , which is made by injection molding and surface graining, can be matched with the protective suits. The voicemitter can make the sounds clear and less losing. The faceseal of the mask is designed to an in-turned rim contact between the mask and wearer’s face which can make the wearer a comfortable feeling and a good dynamic airtightness, and it is suitable for more than 95% adult to wear. Large eyes lens of the mask is made of a reinforced polycarbonate by surface coating, it is performed by anti-fog treatment so that can possess a wide visual field, excellent optical properties and shock resistance. The structure of the nosecup, which has a good performance, can ensure an excellent brightness of eyes lens. The head harnesses can be adjusted at random to ensure a comfortable wearing.
3.MF14 gas mask technical specification
| service life(min) | Exhalation | Oil mist penetration coefficient | Inhalation resistance,
dapa |
Total field of vision | Binocular visual field | Total weight | Packing |
| >30min,
CNCI:1.5mg/l, 30l/min, Φ:80% |
≤100pa | ≤0.005% | ≤98pa | ≥75% | ≥60% | <780g | Carton box |
4.Packing:
per unit Outer Bulky Packing : 850*510*360mm (20pcs/carton box)
total gross weight :21kg
5.Usage maintenance and maintain
5.1.The selection of gas mask
(1)checking the position between glasses and eyes, if the position of our eyes is 10mm higher than the horizontal center line, that proves the size is correct. And if it is higher than this, that means the size is small, and on the contrary that indicate the size is big.
(2)Pressing the connector of the canister tightly, and taking a breath, if the mask clings face without any air leakage that means a right selection.
5.2.The procedure of wearing gas mask
(1) adjusting the position of fillets
(2) opening them and putting the mask on and then tightening the fillets to finish wearing Attention:
(3) fillets can not be curl or be pressed inside the mask
(4) the stretching forces on each fillet should be equal
(5) screwing the canister tightly up the connector in order to prevent air leakage
(6) considering both comfortable and air tightness while tightening the fillets
(7) after a long time wearing, there would have accumulation of sweat, especially in summer days, on this occasion, bowing down and taking a deep breath, the sweat would release form the exhaust clack.
5.3.Pick gas mask off
Grasping the phone and lifting it up ahead to pick the gas mask off bottom-up.
5.4The maintenance and storage of gas mask
(1) wiping the sweat and dirty things on both side of the mask after using keeping the glasses and exhale vale clean especially
(2) in case of having dirty on the exhaust clack, opening the voice meter and pick out the combination of exhaust clack and phone film to make a clean, and then setting them up as original, tightening the cover
(3) stalling the mask in a shady dry place with supporter inside, the same time keeping them away from the organic solvent such as gasoline etc, in order to prevent the distortion of mask
(4) taking the canister off when it would not be used for a long time, and putting the cover, because the canister would low the capacity of adsorption under a wet condition.
