Testing Basis:
XF/T 635-2023 Infrared Thermal Imagers for Fire-fighting
Test Outline for Infrared Thermal Imagers for Fire-fighting
GB 4706.1-2005 Safety of Household and Similar Electrical Appliances – Part 1: General Requirements
Mass: 850g
Overall Dimensions of the Machine: 243mm * 103mm * 160mm
Temperature Measurement Range: Minimum temperature ≤ -40℃, Maximum temperature ≥ 1500℃
Temperature Measurement Accuracy ≤ ±4% of the reading
Detection Modes: The device has detection modes such as iron red, rainbow, gray-white, white-gray, blue-red, hot-cold, feather red, tan, and custom modes.
The device has a one-click photo-taking function.
The device can track the highest and lowest temperatures and display the temperature values on the screen in real time.
After the thermal imager freely drops from a height of 2 m to a hard ground once in each of the three directions (X/Y/Z), the thermal imager functions properly.
After the vibration test, the thermal imager functions properly.
The device is equipped with two batteries.
Screen Color Modes: Three modes, namely infrared image, visible light image, and picture-in-picture fusion function (fusion of visible light image and infrared image)
Monitor: 3.5 inches
Infrared Resolution: 384*288
Display Image Refresh Rate: 60Hz
Field of View: 49.2°*36.3°
Protection Level: IP68
Continuous Working Time in Specific Environmental Temperatures: 30 minutes at 80℃, 10 minutes at 120℃, 5 minutes at 260℃
Standard Working Time: ≥ 4h
Leakage Current: ≤ 0.5mA
It can withstand a voltage of 1250 V of a basic sine wave with a frequency of 50Hz for 1 minute without breakdown or flashover during the test.
Explosion-proof Mark: Ex ib ⅡC T6 Gb /Ex ib ⅢC T80℃ Db
|